This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Wednesday, August 16, 2017

Simple CabSim

Came across this design in researching a different project and thought I'd draw it up. It uses 3 transistors and doesn't take up a lot of space, so you should be able to fit it in a 1590A or add it to another pedal. More info can be found here. Sounds like you can use pretty much any medium-high gain PNP/NPN pair for Q2-3 (2N5087/2N5088, BC560/BC550, etc).

Monday, August 14, 2017

Tortenmann TA-100

Came across the schematic for this and thought it would be a good addition. It's a unique germanium overdrive using PNP AC128s, though the effect is a negative ground effect (so it can be daisy chained with other pedals). The TA-100 has been used by Ryan Adams and sounds great through a Princeton Reverb. Schematic here on FSB.


Friday, August 11, 2017

Dunlop Band of Gypsys Fuzz Face

Here's the Band of Gypsys Fuzz Face from Dunlop for Fuzz Friday. Despite being called a Fuzz Face, the actual circuitry of the Band of Gypsys version isn't even close to the original Fuzz Face. It's pretty close to an Octavia without the transformer. Here's the schematic for reference.


Wednesday, August 9, 2017

MXR Custom Badass '78 Distortion

I've wanted to draw this one up for a while. It's a fantastic clone/variation of the  Boss DS-1 Distortion. I had one for a while and loved it, but ended up selling it to fund some other stuff. But I'm definitely adding this one to the pile. You can sub a TL072 or JRC4558 in place of the TLC2262 if you need to.


Monday, August 7, 2017

JHS Angry Charlie

I've gotten a few requests to redo the MI Audio Crunch Box with board mounted pots. How is that relevant to the Angry Charlie you ask? Well, it's the same circuit. JHS added a cap in parallel with the existing cap coming off the Presence control to ground which tames some of the highs. So if you want the Crunch Box, just leave that cap out.


Friday, August 4, 2017

Jon Patton's Mossy Sloth

Finishing out Jon Patton week with the Mossy Sloth Fuzz for Fuzz Friday. It's a pretty unique transistor-based fuzz and uses MOSFETs to create some asymmetrical clipping for some unusual fuzz and distortion sounds. Loads more info can be found here.


Wednesday, August 2, 2017

Jon Patton's Blue Warbler

Continuing Jon Patton Week with a vibe/tremolo effect called the Blue Warbler. It features envelop control over the LFO and can be built with one or two LDR stages (layout below reflects the 2 stage version). Jon explains it best, so be sure to check out his build doc and demo below. It'll be a little tight in a 1590B because of the way the pots are board mounted, but should be doable.